LTPRTZ wiring harness · 4-pin DT · 2 auxiliary lights
The clean connection for your lighting setup.
The LTPRTZ wiring harness for two auxiliary lights with 4-pin DT plugs is the right solution
when two compatible LED auxiliary lights need to be integrated into the vehicle in a clean, protected and structured way.
Relay, fuse, switches and connectors are designed for practical offroad and vehicle installations.
Less improvisation. More structure. Better control over your auxiliary lighting.
2× 4-pin
DT plugs for two lights
Ideal for connecting two compatible LED auxiliary lights when high beam and position/amber functions
need to be controlled cleanly.
Made for clean wiring instead of cable chaos.
When installing auxiliary lights on a vehicle, powerful lights are only part of the setup. A reliable electrical connection
is just as important. This relay wiring harness with 4-pin DT connectors includes the essential components
needed to connect two compatible LED auxiliary lights to the vehicle in a clean and structured way.
The preconfigured connections, included switches, relay and fuse help make the installation clear and easy to follow –
whether on an offroader, camper, pick-up, van or work vehicle.
For high beam, position light and amber function.
The wiring harness is designed for lights with multiple functions. One toggle switch is used to control the high beam,
while the second toggle switch can be used for white position light or the amber function.
This makes the harness especially suitable for modern auxiliary lights with 4-pin DT connection where not only the main light,
but also additional functions need to be integrated cleanly.
Key advantages at a glance
The wiring harness is a practical solution for anyone who wants to connect two auxiliary lights in a clean, protected and controlled way.
2× 4-pin DT
Two DT plugs for connecting two compatible LED auxiliary lights.
Relay & fuse
With 40A high-performance relay and fuse holder with 30A blade fuse.
2 toggle switches
For separate control of high beam as well as position light function.
Installation-friendly
Includes connectors, crimp connectors and M8 ring terminals for battery connection.
Clean connection directly to the battery.
The wiring harness includes battery positive and negative ring terminals for M8 connections. This allows the power supply
to be set up directly and clearly on the vehicle. Relay and fuse support a protected installation.
The cable length of approx. 3 metres provides a practical basis for many installation situations,
for example in the engine bay, front area or compact offroad and camper setups.
Optionally usable with CAN bus control.
The harness can be used with the included toggle switches or optionally in combination with a suitable
CAN bus high beam control unit. This allows the lighting setup to be configured flexibly depending on the vehicle
and installation concept.
Depending on the installation, a separate ground wire from the dashboard may be required for switch illumination.
Electrical installation should be carried out professionally and in line with the vehicle configuration.
Technical data & scope of delivery
The key specifications of the wiring harness for two auxiliary lights with 4-pin DT plugs.
Product type
Relay wiring harness for 2 LED auxiliary lights
Connectors
2× 4-pin DT plugs
Cable length
Approx. 2 m
Relay
40A high-performance relay
Fuse
30A blade fuse with fuse holder
Switches
2 toggle switches included
Battery connection
Positive and negative ring terminals for M8
Maximum power
10A
Included
Connectors and crimp connectors
24V operation
Matching 24V relay must be ordered separately
Important note: Please check compatibility with the respective light model before installation.
For 24V operation, a suitable 24V relay is required. Installation must be carried out professionally and in accordance
with applicable regulations.
For a lighting setup that does not feel improvised.
The LTPRTZ wiring harness for two auxiliary lights with 4-pin DT plugs is the right choice
when auxiliary lights need to be integrated into the vehicle in a clean, protected and controlled way –
whether on an offroader, camper, pick-up, van or work vehicle.
Product safety information
Manufacturer information:
WINCH INDUSTRY GmbH
Siemensstr 7A
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
Responsible person:
WINCH INDUSTRY GmbH
Siemensstr, 7a
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
https://www.winchindustry.com
| Item information |
Value |
| Shipping weight: |
2,00 kg
|
| Item weight: |
1,90 kg
|
