With the help of the detailed installation manual, you can install your headlights in the grille of your vehicle by yourself.
Mounting Brackets:
- four high-quality mounting brackets for two headlights
- stable 3D-printed mounting brackets
- paintable
- UV- and weather-resistant ABS material
- fits VW Crafter 1st Gen. Facelift (2012-2016)
- alignment of the headlights on the bracket via elongated holes
Headlights:
- 3rd generation of our popular TRX series
- with position light strips in white (with E-approval)
- AMBER light strips in orange (for off-road use only)
- with off-road boost mode function. The boost mode can be activated off public roads.
- new anti-glare reflectors combine focused spot and wide-dispersing flood elements for homogeneous illumination of the entire field of vision
- complete with mounting materials
- unique stealth design without screws on the front
- intended for use on public roads with ECE-approved high beam
Technical Specifications:
- High beam power: R149: 22.8W | Boost mode: 47.6W
- Position light power: R148: 6W
- Operating voltage: 10-30 V
- Protection class: IP 67
- LED chips: 12 pcs x 5W
- Light output (effective): 1,540 lm | Boost mode: 3,238 lm
- Housing color: black
- Color temperature: 5800K
- Material: extruded aluminum housing
- Lens material: polycarbonate
- Mounting: robust aluminum bracket
- Light dispersion: Spot 10°
- Range: 658 m (0.25 Lx), 329 m (1 Lx)
- Homologation: ECE R149 | R10
- Reference number: 25
- Dimensions L x W x H (housing): 20.36 x 6.71 x 7.0 cm
Relay Wiring Kit with Dongle
Wiring kit for easy connection of the additional headlights. All connections and cable lengths are pre-assembled so that the installation can be fast, simple, and safe.
The wiring kit is connected only to the battery in the engine compartment, the corresponding ground point, and the headlights.
No cables need to be routed into the passenger compartment!
An integrated Bluetooth relay in the wiring kit communicates with the vehicle via an OBD dongle. This enables the headlights to be controlled synchronously with the vehicle's factory high beams.
No need to search for the high beam signal, and destruction-free installation is guaranteed.
The switch between white and orange position lights can be made via a plug connection in the engine compartment.
Before first use, the dongle must be set up via the app: The appropriate protocol for the vehicle must be selected in the app, and the signals assigned. Estimated time: approx. 5 minutes.
Notes:
The use of the orange position light is only permitted off public roads!
The reference number of the main headlights must be checked by the customer to avoid exceeding the allowed total reference number of 100. This mainly applies to vehicles with factory-installed LED headlights.
For some vehicles, it may be necessary to test multiple protocols in the XBB app to select the correct protocol for your vehicle.
CAR-ELECTRIC Wiring Kit:
Relay wiring kit for two LED high-performance lights with 4-pin DT connectors
- fits only for headlights LP-TRX3-7E
- 2x Deutsch 4-pin connectors
- custom-fit wiring kit for connecting two headlights
- with relay carrier for XBB PowerUnit relay in the engine compartment
- High-quality cables and contacts, ring terminals: M6
- Made in Reinbek near Hamburg, Germany
XBB Bluetooth Dongle:
- XBB Bluetooth dongle for connection to the OBD interface
- Setup via app (App name: XBB)
- In-app configuration of headlight control
- Choice of various functions: e.g. coupling high beams with high beam signal, coupling position light with engine running signal
Delivery Contents:
- 2x TRX 3.0 7 inch
- 4x ABS mounting brackets
- 1x CAR-ELECTRIC wiring kit
- 1x XBB Dongle & XBB PowerUnit
Product safety information
Manufacturer information:
WINCH INDUSTRY GmbH
Gutenbergstraße 4
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
Responsible person:
WINCH INDUSTRY GmbH
Gutenbergstraße 4
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
| Shipping weight: |
2,10 kg
|
| Item weight: |
2,05 kg
|
