With the help of the detailed installation guide, you can install your headlights in the grille of your vehicle yourself.
Mounts:
- Four high-quality mounts for the installation of two headlights
- Sturdy mounts made from 3D printing
- Paintable
- UV- and weather-resistant ABS material
- Fits only for VW Crafter Gen. 2 / Grand California
- Headlight alignment on the mount through elongated holes
Headlights:
- 3rd generation of our popular TRX series
- With position light strips in white (with E-approval)
- AMBER light strips in orange (for offroad use only)
- With offroad boost mode function. The boost mode can be activated off public roads.
- The new anti-glare reflectors combine focused spot and wide-spreading flood elements for homogeneous illumination of the entire field of view
- Comes complete with mounting materials
- Unique stealth design with no screws on the front
- Application: Public roads with ECE-approved high beam
Technical data:
- High beam power: R149: 22.8W | Boost mode: 47.6W
- Position light power: R148: 6W
- Operating voltage: 10-30 V
- Protection class: IP 67
- LED chips: 12 pieces of 5W
- Effective light output: 1,540 lm | Boost mode: 3,238 lm
- Housing color: black
- Color temperature: 5800K
- Material: extruded aluminum housing
- Lens material: polycarbonate
- Mounting: robust aluminum mount
- Light distribution: spot 10°
- Range: 658 m (0.25 Lx), 329 m (1 Lx)
- Homologation: ECE R149 | R10
- Reference number: 25
- Dimensions L x W x H (housing): 20.36 x 6.71 x 7.0 cm
Relay Wiring Kit with Dongle
Wiring kit for easy connection of auxiliary headlights. All connections and wire lengths are pre-configured, ensuring that the installation is quick, simple, and secure.
The wiring kit is simply connected to the battery in the engine compartment, the corresponding ground point, and the headlights.
No cables need to be routed into the passenger compartment!
An integrated Bluetooth relay in the wiring kit communicates with the vehicle using an OBD dongle. This allows for the headlights to be controlled synchronously with the vehicle’s standard high beam.
This eliminates the need to search for the high beam signal, and damage-free installation is ensured.
Switching between white and orange position lights is possible via a plug connection in the engine compartment.
Before the first use, the dongle must be set up using an app: the correct protocol for the vehicle must be selected in the app, and signals must be assigned. Time required: about 5 minutes.
Notes:
The use of the orange position light is only permitted off-road!
The reference number of the main headlight must be checked by the customer to avoid exceeding the maximum allowable total reference number of 100. This primarily applies to vehicles with standard LED headlights.
In some vehicles, it may be necessary to test multiple protocols in the XBB app to select the correct protocol for your vehicle.
CAR-ELECTRIC Wiring Kit:
Relay wiring kit for two high-performance LED headlights with 4-pin DT connectors
- Fits only for headlights LP-TRX3-7E
- 2x Deutsch 4-pin connectors
- Custom wiring kit for connecting two headlights
- With relay holder for XBB PowerUnit relay in the engine compartment
- High-quality cables and contacts, ring terminal execution: M6
- Made in Reinbek near Hamburg, Germany
XBB Bluetooth Dongle:
- XBB Bluetooth dongle for connection to the OBD interface
- Setup via app (App name: XBB)
- In-app configuration of the headlight control
- Choice of various functions: e.g. linking the high beam to the high beam signal, linking the position light to the engine running signal
Scope of delivery:
- 2x TRX 3.0 7 inch
- 4x ABS mount
- 1x CAR-ELECTRIC wiring kit
- 1x XBB dongle & XBB PowerUnit
Product safety information
Manufacturer information:
WINCH INDUSTRY GmbH
Gutenbergstraße 4
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
Responsible person:
WINCH INDUSTRY GmbH
Gutenbergstraße 4
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
| Shipping weight: |
2,23 kg
|
| Item weight: |
2,14 kg
|
