INDUSTRIAL · HEATED & DIMMABLE 40W FLOOD WORK LIGHT
Built for cold, moisture and changing visibility.
The LTPRTZ INDUSTRIAL heated and dimmable 40W flood work light adds practical functionality to powerful work lighting. In addition to 4800 raw lumens, it features an automatic lens heater below 0°C and a 50% dimming mode activated by a switching sequence. It is designed for vehicles and machinery that must remain reliable in snow, moisture and difficult weather conditions.
Heating for clear lenses. Dimming for flexible output. Built for demanding professional use.
4800
lm
Raw lumens
Strong work-light output combined with practical winter and visibility functions.
Heating and dimming where it actually matters.
When the outside temperature drops below freezing, the built-in lens heating activates automatically to keep the light free from snow and moisture. If full output is not required, brightness can be reduced by 50% via an on / off / on sequence within 5 seconds. This makes the light especially useful in changing weather and working conditions.
Built for visibility, stability and rough daily use.
The die-cast aluminum housing, integrated 2-pin DT connector and included mating connector make installation straightforward and durable. Together with OSRAM LED chips, IP68/IP69K and a rugged construction concept, the light is well suited to professional environments where consistent output and reliable operation are essential.
Key highlights at a glance
This heated and dimmable INDUSTRIAL 40W flood work light combines practical winter-readiness, flexible brightness control and strong lighting performance in one professional housing.
4800lm
Raw lumens
Powerful output for demanding work environments.
HEAT
Automatic heating
Activates below 0°C to keep the lens clear.
50%
Dimming mode
Brightness reduction via switching sequence when less light is needed.
OSRAM
LED chips
Reliable, even illumination for professional use.
IP68/69K
Protection rating
Dustproof and high-pressure water resistant for extreme conditions.
DT
Connection
2-pin DT connector on the housing, mating connector included.
Engineering & substance
Built for winter service, utility vehicles and machinery in bad weather.
This light is designed for applications where visibility must remain consistent even when snow, moisture and freezing temperatures become a real problem. The heated lens function, dimming option and rugged construction make it especially suitable for professional fleets, winter service vehicles, agricultural applications and utility equipment used in shifting conditions.
Heated lens
50% dimming
OSRAM LEDs
IP68 / IP69K
| Light output |
4800 raw lumens |
| Special functions |
Automatic heating below 0°C, 50% dimming |
| LED chips |
OSRAM |
| Housing |
Die-cast aluminum |
| Protection |
IP68 / IP69K |
| Connection |
2-pin DT connector, mating connector included |
| Approval |
ECE R10 |
Warning: Never look directly into a switched-on headlamp. This can cause permanent damage to your eyes, including blindness.
4800 lumens. Heated lens. Ready for winter work.
LTPRTZ · INDUSTRIAL Heated & Dimmable 40W Flood Work Light
ltprtz.com
Product safety information
Manufacturer information:
WINCH INDUSTRY GmbH
Siemensstr 7A
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
Responsible person:
WINCH INDUSTRY GmbH
Siemensstr, 7a
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
https://www.winchindustry.com
| Item information |
Value |
| Shipping weight: |
1,25 kg
|
| Item weight: |
1,10 kg
|
| Dimensions
( Length × Width × Height ):
|
11,60 × 7,50 × 12,55 cm |
