Our strongest Offroad Lightbar!
The highly efficient driver circuit transfers 97% of the power directly to the LEDs. The efficiency of 94% ensures more light with lower power consumption and a longer lifespan.
Custom-made oversized cooling fins cool the LEDs. This increases the lifespan while providing brighter light.
The "Dow Corning" silicone gel inside is specifically designed for lighting systems and seals across the entire temperature range.
In case of condensation, the M-Pore® pressure relief valve supports moisture exit while preventing water ingress.
For homogeneous illumination, the combination of 10° spot and 35° flood elements is used. The spots are placed centrally, while the floods are mounted on the outer sides. This ensures a wide distribution of light in front of the vehicle, as well as focused light at great distances.
This enables proactive driving off-road, even at high speeds.
Protected against:
- Reverse polarity
- RFI/EMC Interference (ECE R10)
- Over- and undervoltages
Special features
- Shockproof | Dustproof | Waterproof IP68
- UV shielded
- Anodized polyester powder coating
- Silicone cable
- Efficient polycarbonate lens reflector
- Operating temperature: -40°C - +95°C
- Lifespan: +50,000 hrs
- M-Pore® pressure relief valve
- Superdrive circuitry: 97% efficiency
- Dow-Corning silicone gel
- Rail profile allows mounting of freely adjustable LTPZ-ALBASE on the underside
- Range: 439m (1Lux), >1000m (0.25 Lux)
Material
- 6063 aluminum die-cast housing
- Shatterproof Bayer polycarbonate lens
Included in the package:
- 1x Lightbar SR250
- 2x Side feet
- 1x Set of mounting screws
For the use of the adjustable mounting feet LTPZ-ALBASE, we recommend a quantity of 5.
Please enter these in the shopping cart when purchasing a bundle.
| Technical data |
|
| Input voltage |
|
9-36V |
|
| Light source |
|
50x 5w cREE HighEnd chips |
|
| Power consumption |
|
250W |
|
| Light output (raw/eff) |
|
29.100lm / 27.500lm |
|
| Light diffusion |
|
Inside: 10° | Outside: 35 |
|
| Lifetime |
|
+50,000 hrs. |
|
| Protection class |
|
ip68 |
|
| Lens |
|
Bayer polycarbonate |
|
| Housing |
|
Die cast aluminum 6063 |
|
| Mounting |
|
vertical |hanging |
|
| Connection |
|
German plug |
|
| Weight |
|
7.29 kg |
|
| Dimensions |
|
1320.8 x 63.5 x 66.0 mm |
|
| Power consumption |
|
10.75a @ 24V |
|
| Homologation: |
|
|
|
|
|
|
EcE R10 |
|
General Information:
Lightpartz uses cREE, one of the world's leading LED manufacturers, for the LED chips for their most powerful off-road lightbar,
known for its temperature resistant high-power LEDs. cREE LED chips are finely selected and extremely robust.
Many cree high-power LEDs still reach over 70% of their original brightness after more than 50,000 hours of operation.
Product safety information
Manufacturer information:
WINCH INDUSTRY GmbH
Siemensstr 7A
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
Responsible person:
WINCH INDUSTRY GmbH
Siemensstr, 7a
86368 Gersthofen, Deutschland
gpsr@winchindustry.com
https://www.winchindustry.com
| Item information |
Value |
| Shipping weight: |
9,00 kg
|
| Item weight: |
7,30 kg
|
| Dimensions
( Length × Width × Height ):
|
132,08 × 6,35 × 6,60 cm |
