CRX 3.0 50 inch · Curved work light bar · Offroad · ECE R10
The curved 50 inch light bar for maximum illumination away from the road.
The LTPRTZ CRX 3.0 50 inch work light bar is built for vehicles that need more visibility
at night than a straight beam alone can provide. With curved design, strong combo beam pattern,
anti-glare reflectors and massive light output, it brings visibility to trails, forest roads, work sites,
offroad routes and large outdoor areas.
Wide front. Massive light output. Curved illumination for serious offroad visibility.
31,584 lm
raw light output
With 18,606 lm effective output, 390–400W and up to 1,300 m range at 0.25 lx.
Curved design for a wider field of view.
Straight light bars mainly illuminate straight ahead – the CRX 3.0 goes further. Its curved construction
follows the vehicle front more naturally and opens the beam further to the sides. This is especially useful
on winding trails, narrow forest roads, offroad routes and work areas where side orientation matters.
The result is a powerful beam pattern with more overview, more presence and a bold look on large offroad vehicles,
pick-ups, vans and expedition builds.
Combo beam with 10° spot and 60° flood.
The beam pattern combines 10° spot for long-range visibility with 60° flood
for broad close-range illumination. This creates a strong mix of distance, near-field lighting and side awareness.
With 1,300 m range at 0.25 lx and 650 m at 1 lx, the CRX 3.0 is designed for demanding offroad nights,
long working hours and intensive outdoor use.
Key advantages at a glance
The CRX 3.0 50 inch combines extreme light output, curved construction, rugged materials and flexible mounting in one powerful offroad light bar.
Curved light bar
Curved 50 inch construction for wider illumination and strong vehicle presence.
10° spot / 60° flood
Combo beam pattern for range, close-range illumination and side visibility.
390–400W output
Massive power with 31,584 lm raw and 18,606 lm effective light output.
IP67 & TCS
Dust and water protection with temperature control system for longer use.
For wide vehicles and serious use cases
The CRX 3.0 50 inch is ideal for setups where light output, offroad styling and vehicle width need to work together.
It is especially suitable for roof racks, bull bars, pick-ups, large 4x4 builds, emergency vehicles, service vehicles
and overlanding projects.
Offroad & overlanding
For trails, gravel roads, forest tracks, expeditions and night drives away from paved roads.
Pick-ups & 4x4
For wide vehicle fronts, roof racks, bull bars, bumpers and bold custom builds.
Work & operations
For worksites, forestry, agriculture, service vehicles, machinery and large-area illumination.
Rugged construction for harsh conditions.
The extruded aluminium housing protects the electronics and supports heat dissipation.
The polycarbonate lens, black housing and robust aluminium mounting bracket are built for vibration,
dust, rain, mud and demanding offroad conditions.
Flexible mounting.
The CRX 3.0 is equipped with 360° side brackets and sliding feet on the rear of the housing.
This allows the light bar to be adapted flexibly to different vehicle concepts and mounting positions.
Usage note: The CRX 3.0 has ECE R10 electromagnetic compatibility approval.
It is designed as a work/offroad light bar. Public road use is only permitted within the applicable legal regulations.
Connection
The light bar is supplied with open cable ends without connector. This keeps installation flexible
and allows the wiring to be adapted to the specific vehicle or build.
BlackGround / negative
RedPositive / high beam
WhiteWhite strip
Anti-glare reflectors and 5,800K light colour.
Anti-glare reflectors support a more controlled beam pattern, while the 5,800 Kelvin colour temperature
creates a modern, clear and high-contrast light appearance.
Technical specifications
The key specifications of the LTPRTZ CRX 3.0 50 inch work light bar offroad.
Item numberLP-CRX3-50-C
Product type50 inch curved LED work light bar
Output390–400W
Operating voltage10–30V
Protection ratingIP67
Light output31,584 lm raw / 18,606 lm effective
Colour temperature5,800K
Housing colourBlack
Beam pattern10° spot / 60° flood
Range1,300 m at 0.25 lx / 650 m at 1 lx
Housing materialExtruded aluminium
Lens materialPolycarbonate
MountingRobust aluminium bracket
Mounting options360° side brackets / sliding feet
SystemTCS temperature control system
HomologationECE R10
ConnectionOpen cable ends without connector
Housing dimensions1271.9 × 131.9 × 70 mm
Item weight5.00 kg
GTIN4260482522513
CRX 3.0 50 inch – curved, powerful and uncompromisingly offroad.
The LTPRTZ CRX 3.0 50 inch work light bar is the right choice for anyone looking for
maximum offroad illumination, strong long-range visibility, wide close-range lighting and a bold curved light bar
for large vehicle setups.
